 Giantz Multi Stage Water Pump Pressure Rain Tank Garden Farm House Irrigation 2000W Black Controller
Previous
	
		
			
			
				Giantz Multi Stage Water Pump Pressure Rain Tank Garden Farm House Irrigation 2000W Black Controller
Previous
    
         
	
Giantz Multi Stage Water Pump Pressure Rain Tank Garden Farm House Irrigation 2500W
When low water pressure gets you down, power it up with our Giantz 6-stage Water Pump. It is the perfect solution where constant on-demand water pressure is needed at the open and close of any tap. You will find our water pump particularly useful for homes, household gardens, farms, commercial entities or any situation where pressurised water is consistently required. The water pump features an IP-rated commercial motor, full stainless steel pump body, cast iron ends, 1.25‘’ inlet and 1‘’ outlet ports, corrosion-resistant brass connectors, efficient cooling system and not least, built-in thermal protection. Pumping out at a rate of 200L/min with a 70m head, the 2500W water pump can send water up to two stories high effortlessly. You can also accurately control the pressure to your precise requirements with the fully automatic controller and monitor it at a glance of the pressure gauge. Power to the pump is as simple as plugging it straight into any Australian standard socket. Whether you are using the pump as a permanent installation or on an ad hoc basis, you can be assured of dependable and reliable water supply in more ways than one.
 
 Features:
 Powerful 2500W self-priming multi-stage pump 
 Garden irrigation, farm irrigation and home water supply 
 100% duty cycle - designed for continuous operation 
 Rust-resistant stainless steel pump body with cast iron ends 
 Fully automatic operation on/off controller 
 Huge 70m head 
 Anti-corrosive alloy motor housing, ceramic and carbon seals 
 Built-in thermal protection 
 Efficient cooling system 
 Highly conductive copper motor 
 Corrosion-resistant brass connector 
 Leak proof rubber ring 
 Easy connecting plug and cable 
 Fully automatic pressure controller 
 Adjustable start-up pressure 
 Australian standard cable and plug
 
 Specifications:
 Pump: 
 MAX power: 2500W, 3.5hp 
 Plug and cord: SAA 250V/10A *0.3m 
 Max pump flow: 12,000L/h (200L/min) 
 Max head: 70m 
 Duty cycle: Continuous 
 Impeller Stainless steel 
 Pump body: Stainless steel 
 Motor shaft: Stainless steel 
 Inlet diameter: 1.25'' (30mm) 
 Outlet diameter: 1'' (25mm) 
 Brass connector: 1'' 
 Protection class: IP44 
 Insulation class: B (130°C) 
 Max ambient temperature: 40°C 
 Max liquid temperature: 60°C 
 Controller: 
 Voltage: 220/240V 
 Frequency: 50/60Hz 
 Maximum current: 10A 
 Maximum water temperature: 60°C 
 Maximum pressure for use: 10bar 
 Protection grade: IP65 
 Inlet and outlet size: 1‘’(25mm) 
 Dimensions: 22cm x 12.4cm x 17cm 
 Colour: Yellow
 
 Package Contents:
 Giantz 6-stage Water Pumpx 1 
 Pump Controllerx 1 
 User manualx1 
 
			 
					